ACURA MDX . ORG
www.acuramdx.org ACURA MDX . ORG Archive > General > Audio & Electronics
 
Navi Conversion Install Help Needed - Click HERE for Original Thread
Advertisement
Rodzir
To all out there I will thank you already! I need a little help with the install. First is where and how do you get to the antenna to hook in the Unit. I cannot find where it is in the dash. I thought that you might be able to get to it by dropping the glove box but I cannt see it. Do you need to remove the wood trim around the Navi unitto get to it?? IF so how do you get it out? Finally where did you hook the Reverse wire coming from the unit. Did you splice it in the shifter console?? Thanks for all your help again!
Rodzir
kishino
I assume when you mean the antenna adapter you mean the FM modulator from the Nav-Tv unit. The plug has to be plugged into the back of teh radio, so that means you will have to remove the trim around the navi. and radio and actually take out the radio/navi. to get to the plug. The removal is actually quite easy.
For the reverse light hookup. I ran a simple hookup wire back to the rear tailight and connected it to the positive reverse lite.
Hope this helps.

Powered by: Search Engine Indexer and vBulletin v2.2.9
Copyright © 2000 - 2002, Jelsoft Enterprises Limited
Copyright 2000 Acuramdx.org. All Rights Reserved.