| jagmeister |
I just finished the Zaino treatment on my car, now it's time for the MDX. Do you all use the full treament for the roof as well?
I used to skip my roof when I had the EXPY. It simply was too hard.
Now the roof is somewhat accessible. But I don't see using Zaino on the roof.
Any suggestions or experiences?
Rob |
|
|
| BaldEagle |
The roof gets a direct hit from the sun so for protection of the paint from UV rays the roof and the hood are the most important areas to Zaino.
I have skipped this area while using Z6 but I try to do the roof and hood first while applying Z5. That way if I run out of gas and don't do the whole vehicle at least the important areas are protected. Also, when you are driving down the road the hood is all you can see. If it is shinny and clean then it makes you feel good no matter what the rest of the vehicle looks like..:jester:
Just noticed this is your first post, Welcome to the forum jagmeister. |
|
|
| DEZRVIT |
| Because the roof and hood get the most direct sun, I pay even more attention to them with Zaino. I apply extra coats of Z-5, Z-2, & Z-6 to them, I also Z-6 the whole vehicle after every wash. |
|
|
| azfansinnc |
I agree with Baldeagle. The roof and hood get the most UV and should be done every time you apply Zaino (which is not every week unless you want to). Actual practice is not quite that regular. I like Baldeagle's idea of doing them first.
Personally, I also make sure to do the bumper also. Makes bug removal easier and adds protection from every day "stuff." |
|
|
|
