| XStatic |
First you need to remove the door panels and tweeter pods
- Disconnect tweeter from wiring harness
- Pull back top right corner of vapor barrier, disconnect mirror wiring harness, and slide off of T-shaped keeper.
- Remove 1 brass and 3 black 10mm bolts (one is behind weather stripping) do not remove small torx screw.
- Use small screwdriver to gently push in sides of retaining device around torx screw and remove mirror.
|
|
|
| XStatic |
| 2 Disconnect mirror wiring |
|
|
| XStatic |
| Once the mirror housing is removed you can remove the foam by pulling gently. |
|
|
| XStatic |
| The glass is only held in place by 4 clips, pull firmly on one side to remove. |
|
|
| XStatic |
| Replacing the mirror is a bit tricky, push down on one side and get it to click and just follow through to get the rest snapped back in place. This will take some force, be careful and try to spread out the pressure so you don't crack the glass. |
|
|
| hammermdx |
| Grea pic's, thanks for sharing! |
|
|
| XStatic |
Here is an exploded view with all the parts available for the side view mirrors.
 |
|
|
| TheyCallMeBruce |
quote:
Originally posted by XStatic
3 Remove bolts
The fourth bolt is hidden from view until you pull back on the weatherstripping, forward of the trianglular mounting area. |
|
|
| catzx6 |
quote:
Originally posted by XStatic
First you need to remove the door panels and tweeter pods
- Disconnect tweeter from wiring harness
- Pull back top right corner of vapor barrier, disconnect mirror wiring harness, and slide off of T-shaped keeper.
- Remove 1 brass and 3 black 10mm bolts (one is behind weather stripping) do not remove small torx screw.
- Use small screwdriver to gently push in sides of retaining device around torx screw and remove mirror.
Any why did you remove the side mirrors? Was it to install your Muth mirrors? Thanks for the details. |
|
|
|
