| tommyp_67 |
I understand that some of you with 01 models have converted to 04 headlights. The low beams goes from 9006 to H11 bulbs (H11 bulb does not fit into 01 connector). I purchased the bulbs and the wiring harness/connector. However, the 01 has a red/green and a black wire feeding into the socket that the bulb plugs into and the 04 harness/connector is a "jumper cable" like setup with 2 gray cables. My questions are:
1. Do I have everything I need to make this conversion?
2. If so please advise on how I should go about splicing these wires given they don't match up.
Thanks! |
|
|
|
