ACURA MDX . ORG
www.acuramdx.org ACURA MDX . ORG Archive > General > General Discussions
 
Anyone install TRUE HID for their fogs in 01-07? - Click HERE for Original Thread
Advertisement
deepstang
My fog lights blew out again and I was wondering if I should get another HID kit like i have for my headlights...on my 05. I know the plastic can melt and it may not work, but i was wondering if anyone has tried.

The new MDXs have a nice color fog....and i am not sure what they use
vlam
I've been using a Xenon Depot HID on my 04 fog for the past 4 years. No problem with melting.
highcountrymdx
One of the beauties of a true HID kit (ballasts, wiring, etc) is that they are much cooler to run. After the initial momentary start up surge, provided by the ballasts, they only require about 35 watts to run, with about 3 times the light output. Normal bulbs are about 55 to 65 watts. I noticed that the surface of the projector headlight assembly is much cooler to the touch. It's barely above ambient. Melting and overheating are not an issue. That's one of the reasons HIDs are speced for battery and hybrid vehicles: Lots of light, reduced electrical demand.

Be careful, as some suppliers sell "HID kits", which are merely a higher wattage bulb (PIAA and Hoen for example). Those bulbs (sold as xenon, the inert gas in the bulb and the HID capsule) are not a true HIDs. Install of higher wattage bulbs may have heat and melting problems, although are generally easier to install, as you simply swap bulbs.
dj-mdx2
You mean you haven't seen this thread
Advertisement
deepstang
quote:
Originally posted by dj-mdx2
You mean you haven't seen this thread


Do you use the same h11 bulbs in our fogs?? I did not regard that thread because i thought that it was comparing apples and oranges.
dj-mdx2
quote:
Originally posted by deepstang


Do you use the same h11 bulbs in our fogs?? I did not regard that thread because i thought that it was comparing apples and oranges.



The 2005 X uses 9006 fogs, H11 lows and 9005 highs. Morph made a nice how-to writeup on bulb replacement here.

I don't intend to replace my fogs with HIDs since I don't think it's worth it in my situation, but I did replace the lows with Polarion HIDs, highs and fogs with XenonMatch HOEN brand lamps on my 2001.
boarderx
I threw in a HID kit and the light output is wonderful. There is a huge difference in the light output as compared to the factory fog lights. I'd recommend them if you don't need them for driving in the fog.

I don't see a lot of fog where I live (maybe 2 days a year), so using them for the fog isn't an issue. The fogs are now much more useful to me than they were before.

Powered by: Search Engine Indexer and vBulletin v2.2.9
Copyright © 2000 - 2002, Jelsoft Enterprises Limited
Copyright 2000 Acuramdx.org. All Rights Reserved.