| PrestigeAuto |
First off I want to say this seems like a really nice forum. Well I purchased a 08 MDX back in Nov and truely love the truck. I got my first oil change at my dealer and when I got my truck home I checked to make sure the dipstick was back and the oil cap was put back on and also I checked the fliter and the oil plug were all secure and no leaks. However my control arm/sub frame which is right under the oil filiter was covered in oil so I wiped that down really good so I thought. Well the next morning I found 2drops of oil on the floor under the susupension link control arm I again checked the filter and the oil plug and both were dry and I had to wipe that sub frame again. I drove it about 100 miles and then sure enough I looked and there was a few drips of oil on the sub frame. I am hopeing since I didn't see any oil on the floor today this was the last wipe and it might just be a poor design to have the filter over that sub frame.
Is this something that ussually happens when they change the oil on this truck or to other owners?
Well I just wanted to see if anyone else has every experience this and if they had any suggestions. I first I got scared I though I had an oil leak but everything on the engine is dry including the filiter and plug.
Also noticed there is no plate covering everything under there I wonder why acura didn't put a door there to keep stuff away from the filiter. It seems pretty exposed. |
|
|