| Lrpba300 |
| here is my BSM put on this wked. I think it adds great extension lines to the "X"... |
|
|
| Lrpba300 |
| after one on the left... |
|
|
| Lrpba300 |
| rhight side b4... |
|
|
| Lrpba300 |
| and after BSM... |
|
|
| AcuraMDX2002 |
| I agree with you - they look great! Did you have any instructions other than the templates? My package said 'instructions not included' or something like that but the templates were inside with the limited instructions printed on them. I tried to find other instructions to decide whether or not to line the flat edge up with the edge of the door. I did line mine up right along the door edge and they look very good. I noticed you placed yours a little distance away from the door edge - why? (I'm not being critical, they still look great, I was just wondering if you had some instructions that told you to do it that way) |
|
|
| Lrpba300 |
| No, I didn't have any "instructions" in the package. It says to refer to the instructions on the templates, but none found. I just decided to use the templates, & they came out great. I also decided to leave a gap for 2 reasons. 1. I was trying to cover more front/back areas w/o being 2 obvious. 2. I 've seen BSM "peel" if the edge is on the egde of the door, soooo, I decided to try it away from them :D |
|
|
| rvehock |
| IMHO the MDX looks much better without BSM. |
|
|
| DaleB |
quote:
Originally posted by rvehock
IMHO the MDX looks much better without BSM.
I have to agree. But if they only came with BSM I would probably not even think about it. |
|
|
| AcuraMDX2002 |
quote:
Originally posted by Lrpba300
No, I didn't have any "instructions" in the package. It says to refer to the instructions on the templates, but none found. I just decided to use the templates, & they came out great. I also decided to leave a gap for 2 reasons. 1. I was trying to cover more front/back areas w/o being 2 obvious. 2. I 've seen BSM "peel" if the edge is on the egde of the door, soooo, I decided to try it away from them :D
Good reason! I searched and searched for photos before installing mine and saw at least one with the 'gap' way too big and at least one (like mine) with no 'gap', now we have your's with a small 'gap' --- either way, they look marvelous! |
|
|
| Lrpba300 |
quote:
Good reason! I searched and searched for photos before installing mine and saw at least one with the 'gap' way too big and at least one (like mine) with no 'gap', now we have your's with a small 'gap' --- either way, they look marvelous!
I agree with you AcuraMDX2002! Some people don't like them, but, to each there own. I think on some colors, (like MB) it breaks up that "up & down look" of the doors..makes it more "stream line" looking :eek: |
|
|
| Lrpba300 |
quote:
Originally posted by rvehock
IMHO the MDX looks much better without BSM.
It's ok if ya don't like the BSM, but I got a question for you. How much difference is there from the '00 Laguna Green to the '01 Granite Green? More gray in one? More green in one? |
|
|
|
